Below are some of the parts that we manufacture for our customers. There are various manufacturing processes used on the parts so you can get and idea of what we can do.
Some of the parts below include:
Folding
Welding TIG/MIG
Laser Profiling
Punching
Paint finish
Zinc Plate finish
Food grade stainless steel burger display spikes manufactured for a local gastro burger restaurant
2mm Stainless brackets with bushes pressed in, all done in house.
A batch of 6mm Mild lifting brackets
These 1.5mm Brackets have been cut out on our Amada punch with the dimple and then folded on our 3meter bystronic brake press.
8mm Mild steel Bar machined down and folded all in house for a local bus seat manufacturer
1mm stainless boxes that are folded and fully tig welded.
Stainless bracket, which is folded and rolled for the Oil & Gas industry
We have custom bending tools to fold this job as it has a large Rad on it.
2mm Stainless Steel Brackets cut on the Mazak Laser and then folded on the Bystronic Press
Various box section uprights, fully welded and nut serted prior to plating.
This bracket has been cut on the laser and then been folded
A pallet full of 1.5mm and 1mm stainless componets cut on the Mazak Laser the Folded on the Bystronic break press, Next process is to fully weld the water tanks so they are watertight.
Stainless Tube Capped off and welded then dressed to achieve a shiny smooth finish
Stainless part consisting on three components welded together
We manufacture these parts for a customer that re-build vintage cars and they are the Brass Radiator Strap.
These are cut out of 1mm mild steel, and we have to maintain the points for the cusomer even with the heat build up on the laser.
1.5mm Aluminium cover with very small returns on the edges.
1.5mm mild steel laser cut channels folded to the requirements of the customer to a tight tolerance.
Aluminium tube welded ono some 2mm aluminium plate
